• The Pyms Lane factory in Crewe has been the Home of Bentley since 1946
  • The Bentley Motors factory is a fully integrated site – all aspects of car production from Design, Engineering, Manufacture, Quality, and Sales & Marketing take place in Crewe
  • The site covers an area of 521,111m2 , with 166,930m2 indoors
  • Pyms Lane is also home to CW1 House, Bentley’s flagship showroom concept, and named after Bentley’s postal code
  • The world’s largest Bentley Boutique is situated in Bentley reception, and sells over 130 items from the Bentley Collection range. Popular items include a black and red leather weekender bag, a Bentley Wings pen and USB in the shape of  Bentley key fob
  • 20,815 solar panels on Bentley’s factory roof can supply up to 40% of the site’s electrical requirements and save an estimated 2,150 tons of CO2 emissions a year. Situated over 3.45 hectares of roof space, they generate enough energy to power 1,200 houses for a year
  • Bentley is the first UK Automotive plant to achieve both the ISO 14001 environmental standard and ISO 50001 energy management standard. While the company has increased production volumes tenfold over the last decade, the amount of energy used per car has fallen by over 60%.
  • Bentley has become the first UK automotive manufacturer to be awarded the triple Carbon Trust Standard for carbon, water and waste reduction
  • With recycling facilities available across the factory Recycling went up from 85% in 2013 to 96.5% during 2015
  • The average length of service at Bentley is 12 years
  • There are currently 444 Bentley colleagues who cycle to work. This is supported by the Bentley cycle to work scheme
  • More than 700 businesses supply 18,000 parts from 31 countries and five continents to Crewe — 82 suppliers are located within a 50 mile radius of the factory
  • Bentley’s ‘Crewe Genuine Parts’ facility at Orion Park in Crewe holds over 60,000 parts, providing support for all cars built from1955 to present day
  • Orion Park has facilities to cut a key without an original to copy, for Bentleys dating to the early 1960s 


  • Bentley was founded in 1919 by Walter Owen Bentley, or W.O. as he was known
  • W.O. Bentley’s mission statement is as true today as it was then “To build a good car, a fast car, the best in its class”
  • The first Bentley car, EXP 1, was completed in London in 1919
  • Cricklewood was the first home of Bentley, producing cars until 1931
  • Rolls-Royce bought the company for £125,275 in 1931. From then on production moved to Derby until 1940, where the famous Derby Bentleys were made
  • The Pyms lane factory was built in1938, originally to manufacture the Merlin aero engine – 26,065 engines were built between 1938 and 1946
  • Car production commenced at Crewe in 1946, the first Bentley to roll off the production line was the Mark V1
  • In 1998 Bentley was acquired by the Volkswagen Group, immediately investing over £1billion to upgrade the factory


  • On average, 26 Continentals and Flying Spurs, 5 Mulsannes and 31 Bentaygas are built a day.
  • It takes around 110 hours to build a Continental GT, around 130 to build a Flying Spur, 130 to build a Bentayga, and around 400 to build a Mulsanne from start to finish
  • 537 employees work on the Continental and Flying Spur production line
  • 83 employees work on the Mulsanne production line
  • Bentley is recognised as the centre of excellence for Wood, Leather, and W12 Engine manufacture within the Volkswagen Group
  • It takes 30 people 13 and a half hours to build one W12 engine
  • It takes 136 hours to complete the interior trim on a Mulsanne
  • To contrast stitch the entire cabin takes between 25-40 additional hours, dependent on customer choice
  • Around 15 bull hides go into every Mulsanne, around 14 in a Bentayga, 13 in a Flying Spur, 11 in a Continental, or 10 for the Convertible version
  • Every Mulsanne steering wheel takes one person 10 metres of thread, 5 hours and 620 stitches to complete
  • Every sheet of wood within a complete car comes from the exact same tree. This is to ensure the pattern and colour is the same throughout the car and remains consistent as it ages
  • Each bundle of veneer consists of 24 leaves
  • A Bentley wood specialist views around 25,000 square metres of veneer in its raw form during selection, checking every inch, to ensure it is of the finest quality, a process that takes two days
  • It takes a human touch to achieve the Mulsanne’s best in industry paint finish. The process takes a team of people 12 hours to sand and polish every single car
  • 300 Bentley employees are involved in the manufacture of the Mulsanne, while 1055 are involved in the manufacture of the Continental and Flying Spur ranges


  • Bentley employs over 4000 people at its Pyms Lane headquarters in Crewe, Cheshire
  • Bentley has been named as one of Britain’s Top Employers for five years running
  • As of the end of 2015, Bentley is operating in 58 different markets, with 203 retail partners
  • 10,100 cars were delivered to customers in 2015, the third consecutive year we have achieved more than 10,000 cars delivered.
  • Beyond Cars, Bentley is also very much involved with projects in the local community, with ‘Cheshire Community Foundation’ being our Charitable Partner.
  • Bentley is driven to engage with schools from the local community, offering 150 work experience positions to pupils from the Crewe area.
  • The company’s school liaison programme also works to raise interest in STEM subjects at schools, and offers foreign language sessions and careers advice.
  • The company also contributes to causes through the Bentley Charitable Appeals Committee and the UK automotive charity BEN
  • Bentley continues its future talent focus taking on a further 36 apprentices, 40 undergraduates and 24 graduates in areas such as manufacturing, engineering and aftersales, among others.
Оцените статью
Добавить комментарий